Flooring installations are a tedious task. Whether it is for a residential home or a commercial building, installing floors can be inconvenient and hectic. This is why it is crucial that a commercial establishment owner is well informed about the process. This way, you will be prepared for the chaos that could come with the project.
Nevertheless, there are ways to control the worrisome aspects of flooring projects. The key is to make preparations beforehand even with your contractor’s promise to take care of everything.
Pre-existing Flooring System Removal
New flooring installation means saying goodbye to your pre-existing flooring system, but this depends on the requirements of your new flooring type. One example is luxury vinyl tile (LVT) flooring in Utah.
This type of flooring can be installed over concrete or vinyl, and not over carpet pads and soft under layers. This means you will have to completely demolish the latter types of flooring system before LVT flooring installation can take place. Consult your contractor regarding the matter. And while you are at it, you can request to have them take care of it as well.
Temporary Removal of Furnishings and Appliances
Since your contractors will have to work on every inch of your floor, this means you will have to temporarily remove furnishings and appliances in your office that may become a hindrance during the installation. This includes removing doors from their hinges, as well.
Schedule to empty out the area at least a day before the installation. In this way, you will not experience any delay in the course of the project.
If you want your new flooring installation to be perfect, it is important to take subfloor preparations into consideration. Your subfloor serves as the foundation of a flooring system. Therefore, it is an essential aspect of the project. After all, a structure needs a good kind of foundation to be a sound one.
Unfortunately, some flooring contractors spend little time or no time at all in preparing subfloors before installation especially, if it has not been agreed upon. This is why you have to discuss this matter with your contractor. Have them inspect if your subfloor is leveled, flat and smooth. If not, you can make arrangements to make the necessary repairs.
Dust Control Management
The biggest problem with all flooring installations is the debris and dust buildup. This is even worse when there is no designated cutting area for the contractors to work on. So, it will be wise to take precautionary measures to address this dilemma. You can either assign a place where the staff can do all the cutting or seal other places to prevent dust and debris from entering.
Although flooring installations might seem a little stressful, good preparation is always key to controlling chaotic and worrisome scenarios. Furthermore, it is a vital step in ensuring that the installation will run smoothly and conveniently. While your contractors will surely do their best not to inconvenience you in any way, it pays to make preparations beforehand yourself.